Industry products

Narrow by:

chemical category
solvent
application
curing speed
UV resistance
viscosity
special properties

Curing agents

Product Viscosity (cps@25°C) Amine value (mgKOH/g) AHEW (g/eq) Gardner colour Solids content (%) Pot-life 150g@20°C (min) Special properties Labelling Technical data sheet Safety data sheet Technical literature
ACQUAMID 511

Water soluble polyamidic hardener for epoxy resins. Suitable for water reducible protective coatings for both metal or concrete. ACQUAMID 511 induces thixotropy (easy application on vertical surfaces)

4000 - 8000 130 - 170 200 <12 50 damp or wet substrates VOC free nonylphenol free bisphenol-A free Nocivo irritante  
ACQUAMID 512

Water soluble polyamidic hardener. Suitable for metal or concrete protective coatings. Induces thixotropy (easy application on vertical surfaces). High solids version

8000 - 12000 200 - 240 135 <12 75 damp or wet substrates VOC free nonylphenol free bisphenol-A free Nocivo irritante  
ITAMID B

Anti corrosive systems: primers, glazes, zinc primers. Good surface hardness and chemical resistance

3100 - 3800 (@ 75°C) 240 - 260 190 ≤8 100 160 - 200 VOC free nonylphenol free bisphenol-A free Nocivo irritante  
ITAMID C

Anti corrosive systems, plasters, structural adhesives, sealants, synthetic mortars. ITAMID C offers less rigid systems and better adhesion compared to ITAMID D

500 - 900 (@ 75°C) 310 - 350 130 ≤8 100 90 - 100 VOC free nonylphenol free bisphenol-A free Nocivo irritante  
ITAMID C/F

Medium viscosity polyamid resin for the formulation of adhesives, protective coatings, anti-corrosion paints; high chemical resistance, flexibility and adhesion.

650 - 950 (@ 75°C) 320 - 360 105 ≤8 100 70 - 140 VOC free nonylphenol free bisphenol-A free Nocivo irritante  
ITAMID D

Anti corrosive systems, plasters, structural adhesives, sealants, synthetic mortars. It can be used pure without diluition

300 - 600 (@ 75°C) 370 - 410 95 ≤8 100 110 - 130 VOC free nonylphenol free bisphenol-A free Nocivo irritante  
ITAMID D/S

Anti corrosive systems, structural adhesives. Higher Imidazolinic content than ITAMID D

2500 - 4500 (@ 40°C) 360 - 400 95 <11 100 120 - 150 VOC free nonylphenol free bisphenol-A free Nocivo irritante  
ITAMID F

Low viscosity polyamid resin for the formulation of adhesives, protective coatings, anti-corrosion paints; high chemical resistance, flexibility and adhesion.

2000 - 4000 420 - 460 95 ≤8 100 90 - 160 VOC free nonylphenol free bisphenol-A free Nocivo irritante  
ITAMID FL300

Epoxy mortars, concrete reparation, adhesives, pouring, paints, plasters, flooring.

500 - 1000 440 - 480 106 ≤8 100 70 - 90 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL31

Low viscosity polyaminoamide resin with high reactivity and low sensitivity to carbamation. For the formulation of epoxy mortars, adhesives, pouring masses, paints, plasters and fooring.

500 - 1000 435 - 495 106 ≤8 100 110 - 130 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL32

Low viscosity polyaminoamide resin with high reactivity and low sensitivity to carbamation. For the formulation of epoxy mortars, adhesives, pouring masses, paints, plasters and fooring.

150 - 400 495 - 535 95 ≤10 100 70 - 130 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL33

Low viscosity polyaminoamide resin with high reactivity and low sensitivity to carbamation. For the formulation of epoxy mortars, adhesives, pouring masses, paints, plasters and fooring.

400 - 700 440 - 480 95 ≤10 100 90 - 120 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL40

Epoxy mortars,concrete reparation,adhesives,pouring,paints,plasters,flooring. Imidazolynic polyamino-amide with good mechanical properties and resistance to carbonation. Low exothermy.

100 - 500 390 - 430 95 ≤8 100 210 - 260 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL40/S

Epoxy mortars, concrete reparation, adhesives, pouring, paints, plasters, flooring. Polyamino-amide with high imidazolynic content, good mechanical properties and resistance to carbamation. Low exothermy.

200 - 600 380 - 420 95 ≤8 100 270 - 330 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL400

Polyaminoimidazolinic hardener with extra long pot life and low viscosity for low exothermy even when pouring large masses. Suitable for mortars, special coatings and concrete reparation

200 - 600 300 - 350 95 <10 100 370 - 430 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL430

Imidazolinic polyamide, ideal in applications where low reactivity and exothermic peak is required. Pot life values are measured in a 3 kg system.

150 - 550 360 - 400 95 <8 100 150 - 200 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL440

Imidazolinic polyamide, ideal in applications where very low reactivity and exothermic peak is required. Pot life values are measured in a 3 kg system.

300 - 700 320 - 360 120 <10 100 400 - 500 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL450

Imidazolinic polyamide, ideal in applications where extremely low reactivity and exothermic peak is required. Pot life values are measured in a 3 kg system.

450 - 850 300 - 340 131 <11 100 800 - 900 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL41

Epoxy mortars, adhesives, paints, grouts for flooring. Imidazolynic polyamino-amide, good water affinity and washability

200 - 500 540 - 580 70 ≤8 100 150 - 170 VOC free nonylphenol free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL41/S

Epoxy mortars,adhesives,paints,grouts for flooring. Imidazolynic polyamino-amide, good water affinity and washability. Higher reactivity compared to ITAMID FL41

150 - 400 575 - 615 70 ≤7 100 35 - 45 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMID FL41W3

Epoxy mortars, adhesives, paints, grouts for flooring. Good resistance to atmospheric agents and diluited inorganic acids, highly washable

100 - 350 550 - 590 70 ≤7 100 40 - 50 nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMINE FL43

Epoxy mortars, concrete reparation, adhesives, pouring, paints, flooring primers. Good reactivity at low temperatures and good chemical resistances

100 - 400 630 - 670 95 <8 100 40 - 50 damp or wet substrates cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMINE FL43/S

Epoxy mortars, concrete reparation, adhesives, pouring, flooring primers. Slow curing, low mixing ratio and higher chemical resistance version of FL43

100 - 400 630 - 670 66 <8 100 55 - 65 damp or wet substrates cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente    
ITAMID FL328

Emulsifible poliamide adduct, ideal for the formulation of epoxy mortar and tile adhesive

1500 - 3500 370 - 430 115 <7 100 160 - 200 damp or wet substrates nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMID FL520

Ideal concrete primer / vapour barrier. Excellent adhesion, flexibility and reactivity also on wet substrates. It is also a very good intermediate coating or high solids primer on metal

500 - 1500 300 - 350 114 <8 100 80 - 120 damp or wet substrates nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMID FL520/S

Excellent flooring primer / vapour barrier and all round protective coatings also on metal. Faster curing version of FL520

500 - 1500 270 - 310 114 <8 100 30 - 40 damp or wet substrates cold cure nonylphenol free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMID FL550/S

Excellent flooring primer / vapour barrier and all round protective coatings also on metal. Better flexibility compared to cycloaliphatic products; suitable for wet and fresh concrete

200 - 500 310 - 350 95 <8 100 30 - 50 damp or wet substrates cold cure nonylphenol free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMID FL540

Extremely hydrophobic. Pastes, adhesives and coatings for wet substrates or underwater application

3000 - 6000 240 - 280 190 <8 90 80 - 120 damp or wet substrates nonylphenol free bisphenol-A free Nocivo irritante Infiammabile  
ITAMID FL531

Blend of poliamide adduct and Mannich Base, for the formulation of surfae tolerant primers to be used in low temperatures enviroments

300 - 1300 280 - 320 101 <8 100 80 - 100 damp or wet substrates cold cure Acido Nocivo irritante Infiammabile Dannoso per l'ambiente  
ITAMID FL531/S

Blend of polyamide adduct and Mannich Base, for the formulation of surfae tolerant primers to be used in low temperatures environments. Accelerated version of Itamid FL531

200 - 1000 290 - 330 101 <8 100 50 - 70 damp or wet substrates cold cure Acido Nocivo irritante Infiammabile Dannoso per l'ambiente  
ITAMID FL560

Phenol free polyamide, ideal for surface tolerant primers for flooring or protective coatings on metal

800 - 1800 300 - 340 115 <8 100 70 - 90 damp or wet substrates cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMID FL560/S

Phenol free polyaminoamide, ideal for surface tolerant primers for flooring or protective coatings on metal. Faster version of Itamid FL560

500 - 1500 320 - 360 115 <8 100 45 - 55 damp or wet substrates cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMID FL620

New generation surface tolerant low viscosity hardener, ideal for VOC free and phenol free primers for metal or concrete. Tolerant to damp or wet supports.

500 - 1500 370 - 410 114 <8 100 80 - 120 damp or wet substrates cold cure VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante    
ITAMID FL620/S

New generation surface tolerant low viscosity hardener, ideal for VOC free and phenol free primers for metal or concrete. Tolerant to damp or wet supports. Low temperature version.

500 - 700 450 - 510 114 <8 100 20 - 50 damp or wet substrates cold cure VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMID FL625

New generation surface tolerant low viscosity hardener, ideal for VOC free and phenol free primers for metal or concrete. Tolerant to damp or wet supports. Free from dangerous amines.

500 - 1500 355 - 395 114 <8 100 80 - 120 damp or wet substrates cold cure VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMID FL625/S

New generation surface tolerant low viscosity hardener, ideal for VOC free and phenol free primers for metal or concrete. Tolerant to damp or wet supports. Free from dangerous amines. Low temperature version.

500 - 1500 350 - 390 114 <8 100 35 - 45 damp or wet substrates cold cure VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMID FL650/S

New generation surface tolerant low viscosity hardener, ideal for VOC free and phenol free primers for metal or conrete. Tolerant to wet or damp supports. Low viscosity, low mixing ratio.

200 - 500 440 - 480 95 <8 100 30 - 50 damp or wet substrates cold cure VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMID A60X

High molecular weight polyamide in xylene for high salt spray resistance protective coatings. Great overall chemical and weathering resistance and surface gloss

2000 - 3500 50 - 56 790 <8 60 nonylphenol free bisphenol-A free Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITAMID A60XM

Solvent based anti corrosive systems. Methoxypropanol version of A60X

2200 - 3300 50 - 56 790 <8 60 nonylphenol free bisphenol-A free Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITAMID B42PMSX

Polyamide in solution of xylene, metoxipropanol and solvesso 100, for formulation of shop-primer for metal surfaces

40 - 100 100 - 110 475 < 7 42 nonylphenol free bisphenol-A free Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno    
ITAMID B70IB

Solvent based anti corrosive systems: primers, varnishes, zinc primers. Solution in isobuthanol. Better surface hardness compared to ITAMID A

2000 - 3000 165 - 185 340 ≤8 70 nonylphenol free bisphenol-A free Acido Nocivo irritante Infiammabile  
ITAMID B70X

70% polyamide in xylene. Industry standard for metal anticorrosion primers

800 - 1500 165 - 185 340 ≤8 70 nonylphenol free bisphenol-A free Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITAMID B80XB

Special anticorrosive paints, also for concrete protection. Good chemical resistance (inorganic acids and alkali, detergents, bleaches)

3000 - 6000 200 - 230 300 ≤8 80 nonylphenol free bisphenol-A free Acido Nocivo irritante Infiammabile  
ITACUR 60XB

Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol and isobuthanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss

900 - 1400 130 - 150 477 ≤8 60 damp or wet substrates cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITACUR 60XM

Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol and methoxypropanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss

2000 - 4000 135 - 160 477 ≤8 60 damp or wet substrates cold cure nonylphenol free bisphenol-A free Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITACUR 70XB

Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol and isobuthanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss

4500 - 6500 150 - 175 409 ≤8 70 cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITACUR 70XB-ES

Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol and isobuthanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss

4500 - 6500 150 - 175 340 ≤8 70 cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno    
ITACUR 75X

Solvent based systems,glazes, zinc primer. Polyamide adduct in solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss. Usable either with solid resin in xylol solution or liquid epoxy resin

3000 - 5500 240 - 270 162 ≤8 75 damp or wet substrates cold cure nonylphenol free bisphenol-A free Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITACUR 600

Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol isobuthanol and methoxypropanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss

1200 - 2200 120 - 160 409 ≤8 60 damp or wet substrates cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITACUR 700

Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol and isobuthanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss

600 - 2500 90 - 115 780 ≤8 50 damp or wet substrates cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITACUR 500

Solvent based coating and finishing. Polyaminic adduct in xylol and isobuthanol solutio. High chemical resistance, gloss and hardness compared to the solvent based polyamidic hardeners. Higher chemical resistance compare to the ITACUR 50XM/50XB.

1000 - 2000 140 - 160 272 ≤3 50 nonylphenol free bisphenol-A free Acido Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITACUR 50XB

Solvent based coating and finishing. Polyaminic adduct in xylol and isobuthanol solutio. High chemical resistance, gloss and hardness compared to the solvent based polyamidic hardeners.

1200 - 1800 100 - 125 331 ≤3 50 nonylphenol free bisphenol-A free Acido Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITACUR 50XM

Solvent based coating and finishing. Polyaminic adduct in xylol and isobuthanol solutio. High chemical resistance, gloss and hardness compared to the solvent based polyamidic hardeners.

1000 - 3000 100 - 125 331 ≤3 50 nonylphenol free Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITACUR 51XB

Epoxyaminic adduct in xylene and isobutanol. For the formulation of non-sticky, gloss paints with no surface defects; excellent resistance to chemical, mechanical, and atmosferic agets

1000 - 2000 90 - 115 340 ≤3 50 nonylphenol free bisphenol-A free Acido Nocivo irritante Infiammabile Dannoso, cancerogeno, mutageno  
ITAMINE K230

Accelerator for epoxy systems containing 2,4,6-tris(dimethylaminomethyl)phenol

150 - 250 <7 Acido Nocivo irritante  
ITAMINE M150

Concrete mortars, adhesives. Highly reactive also at low temperatures. Usable as accelerator of aminopolyamides.

200 - 400 560 - 600 95 ≤3 100 8 - 11 cold cure bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE M150FF

Nonylphenol free version of M150

200 - 500 570 - 600 95 ≤4 100 8 - 11 cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE M150FF/V0

VOC free and nonylphenol free version of M150

200 - 500 560 - 610 95 <6 100 8 - 11 cold cure VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE M160

Concrete mortars, adhesives. Extremely reactive also at low temperatures. Usable as accelerator of aminopolyamides.

500 - 800 570 - 610 95 ≤3 100 4 - 11 cold cure nonylphenol free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMINE RT22

Fast curing, low viscosity hardener with high penetration and high wetting capacity of fiberglass or carbon-fibers

100 - 200 700 - 760 48 <3 100 35 - 40 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE RT22/S

Good penetration and wetting of glass and carbon fibers. Accelerated version of RT22

100 - 200 680 - 720 48 <3 100 15 - 25 bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE RT23/SV

Excellent penetration and wetting of carbon or glass fibers. Accelerated version of RT22/S

20 - 160 895 - 940 48 <3 100 12 - 22 VOC free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE RT200

Extreme penetration and wetting; extra low viscosity. In combination with ITAPOX 106 enables the maximum compatibility with glass and carbon fibers

20 - 50 900 - 1000 48 <3 100 20 - 30 VOC free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE RT290

Excellent resistance to solvent, even ketonic, also for prolonged immersion. High reactivity and mechanical properties

50 - 150 900 - 1050 38 <3 100 14 - 20 VOC free nonylphenol free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMINE RT380

Excellent resistance to solvents, including ketonic solvents, also for prolonged immersion. Fast curing and high mechanical properties

1000 - 3000 740 - 880 38 <3 100 12 - 18 VOC free nonylphenol free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMINE RT385

Good mechanical proprieties and very good chemical resistance to solvents

1800 - 2800 910 - 970 38 <6 100 10 - 20 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE CA10

Very low viscosity hardener with high yellowing, mechanical and chemical resistance. Formulated to be used in combination with ITAPOX 160 for food contact approved systems

10 - 30 310 - 370 51 <2 100 50 - 60 nonylphenol free bisphenol-A free food contact Acido Nocivo irritante  
ITAMINE CA30

Solvent free epoxy coatings, self levelling mortars, adhesives. Usable by flow or injection also with fillers. Excellent selt levelling properties, yellowing resistance, mechanical and chemical reistance.

15 - 30 480 - 510 57 <3 100 80 - 100 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA30LA

Based on low viscosity modified cycloaliphatic polyamines, for solventless coatings, self levelling mortars, adhesives, pouring, injection, loaded formulations

10 - 30 480 - 520 57 <3 100 120 - 160 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA30LB

Based on low viscosity modified cycloaliphatic polyamine. Slow version of Itamine CA30LA optimized for injection and pouring in composites field

15 - 30 480 - 550 57 <3 100 160 - 260 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA30LC

Based on low viscosity modified cycloaliphatic polyamine. Slow version of Itamine CA30LB optimized for injection and pouring in composites field

15 - 30 480 - 550 57 <3 100 250 - 350 nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMINE CA48

Medium viscosity product with excellent chemical and mechanical resistances. High gloss of the finished product

500 - 3000 520 - 560 57 ≤4 100 30 - 50 VOC free nonylphenol free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMINE CA50

Self levelling hardener for flooring and floor painting,resin application on marble and granite. High reacting in wetting conditions and cold temperatures, high mechanical and chemical properties. High gloss of the finish product. Good resistance to the yellowing

50 - 120 300 - 320 95 ≤2 100 50 - 70 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA51

Hardener for flooring and floor painting. Good mechanical and chemical properties. High gloss of the finish product. Good resistance to the yellowing, good self levelling properties

200 - 400 340 - 380 95 ≤3 100 15 - 25 nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso, cancerogeno, mutageno    
ITAMINE CA51L

Hardener for flooring and floor painting. Good mechanical and chemical properties. High gloss of the finish product. Good resistance to the yellowing, good self levelling properties. Slow version of the CA51

150 - 250 280 - 320 95 ≤2 100 30 - 40 bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE CA54

High chemical resistance and good adhesion even in presence of damp surface. Good reactivity even at low temperature and high humidity. Smooth surface

4800 - 8800 290 - 350 95 <2 100 40 - 60 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA58

High resistance to chemical and atmospherical aggression, good adhesion and reactivity on damp surfaces and at low temperatures. Ideal as a finishing product thanks to its excellent gloss, yellowing resistance, levelling and abrasion resistance

400 - 600 280 - 340 104 ≤2 100 45 - 55 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA60

Solvent free epoxy coatings, epoxy mortars, industrial flooring, suitable for varnishes. Good chemical and mechanical resistance. Good levelling and yellowing resistance

300 - 500 265 - 285 111 ≤3 100 45 - 50 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA61

Excellent wetting, self levelling and carbamation resistance properties. Excellent reactivity in damp conditions and low temperatures

500 - 800 220 - 320 114 ≤4 100 20 - 28 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA62

High gloss high UV resistance top coat hardener. Excellent air releasing and wetting properties. Very good resistance to carbamation

10 - 100 300 - 360 85 <2 100 50 - 60 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA64

Flexible systems, joints and elastic structural adhesives. Can be used in combination with any standard epoxy resin and will give an average elongation at break of 80-90%. Does not loose flexibility with time or at low temperatures (-10°C).

600 - 1800 110 - 170 254 <7 100 40 - 70 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE CA70

Solvent free epoxy coatings, epoxy mortars, industral flooring

300 - 500 260 - 320 114 ≤3 100 35 - 45 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA70BR

High resistance to chemical and atmospherical aggression, good adhesion and reactivity

300 - 500 340 - 380 95 ≤3 100 35 - 45 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA80

Solvent free epoxy coatings, epoxy mortars, usable by flow or injection, also with high loaded compounds, primer for industrial flooring. Good reactivity in damp conditions and cold temperatures (0-5 °C). High adhesion properies in non trated surfaces. Good chemical and mechanical resistance

20 - 60 400 - 440 95 ≤6 100 20 - 25 nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMINE CA81

Solvent free epoxy coatings, epoxy mortars, usable by flow or injection, also with high loaded compounds, primer for industrial flooring. High adhesion properies in non trated surfaces. Good chemical and mechanical resistance

140 - 200 410 - 450 95 ≤6 100 20 - 30 bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE CA83P

Excellent as a primer in industrial flooring, also in damp conditions and cold temperatures

100 - 200 290 - 320 95 < 4 100 30 - 40 damp or wet substrates cold cure bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE CA800G

Excellent floating properties for self levelling floor with additive which gives excellent resistance to carbamatation, protecting the surface from moisture, that remain bright.

300 - 500 270 - 310 95 <2 100 20 - 30 nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE CA110

Solvent free epoxy coatings, self levelling mortars, adhesives, self levelling flooring. High reacting in wetting conditions and cold temperatures

400 - 1000 250 - 350 76 ≤5 100 15 - 25 damp or wet substrates cold cure nonylphenol free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE CA119

Self levelling flooring and solventless coating; good wetting properties. Good reactivity in damp conditions and low temperatures

100 - 300 330 - 350 95 <3 100 35 - 45 bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMINE CA119/V0

VOC Free version of CA119. Suitable for VOC free top coats with medium/low reactivity.

100 - 300 300 - 360 95 <4 100 120 - 140 VOC free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno      
ITAMINE CA120

Very low epoxy hardener for civil and industrial floorings, both self levelling or decorative. Very good for the high gloss and yellowing resistance

20 - 80 300 - 360 85 <5 100 35 - 55 nonylphenol free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMINE CA120FF

Phenol free version of CA120

5 - 50 300 - 360 85 <3 100 60 - 80 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA155

High carbamation resistance, even at low temperatures, and high gloss. Fast curing even at 10°C

300 - 400 355 - 375 95 <3 100 20 - 25 cold cure bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE CA158

Self levelling floorings and solventless coating; good wetting properties. Good reactivity in damp conditions and low temperatures

200 - 500 295 - 355 95 <4 100 30 - 50 nonylphenol free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE CA158/V0

VOC Free version of CA158. For improved surface hardness and chemical resistances in VOC free coatings.

140 - 240 295 - 355 95 <4 100 90 - 110 VOC free nonylphenol free Acido Nocivo irritante Dannoso, cancerogeno, mutageno    
ITAMINE CA165

Phenol free hardener for epoxy resin for self levelling floorings with excellent surface and high gloss. Good yellowing and water spotting resistance

100 - 300 290 - 340 95 <2 100 20 - 50 nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMINE CA330

Phenol free and VOC free hardener. Can be substituted to the classic flooring hardeners without loosing curing speed or surface quality

30 - 120 370 - 430 76 <6 100 15 - 35 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante      
ITAMINE CA340

Phenol free and VOC free hardener. Can be substituted to the classic flooring hardeners. Excellent self levelling properties and extra fast curing (walkable in 24h)

120 - 220 330 - 390 76 <6 100 15 - 35 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante      
ITAMINE CA350

Phenol free and VOC free hardener. High surface quality and 100:50 mixing ratio. Slower curing for top coats or single layer coatings

80 - 180 285 - 345 95 <6 100 70 - 90 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante      
ITAMINE CA355

Phenol free and VOC free hardener. Suitable for high thickness self levelling and top coats. Excellent levelling and surface appearance

320 - 420 270 - 330 95 <6 100 40 - 60 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante      
ITAMINE CA488

Phenol free hardener for epoxy resin, for self levelling civil and industrial floorings , with beautiful surface and high gloss

220 - 420 280 - 330 95 <2 100 15 - 35 nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE CA850

Specific hardener for cycloaliphatic resins; in combination with ITAPOX 900 yields clear and defect free films with outstanding yellowing resistance. Suitable for decorative, transparent/glossy systems, outdoor coatings, encapsulations.

10 - 50 440 - 500 65 <2 100 440 - 500 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE CA830

Specific hardener for cycloaliphatic resins; in combination with ITAPOX 906 yields clear films with outstanding yellowing resistance. Quicker version of Itamine CA850. Suitable for decorative, trnasparent/glossy systems, outdoor coatings, encapsulations.

50 - 300 490 - 550 57 <2 100 70 - 110 VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE MB400P

Epoxy mortars, adhesives, plasters. Excellent in wetting conditions and/or cold tempertaures (wet concrete). Excellent mechanical properties. Polyeric version of Itamine MB400

300 - 500 370 - 410 75 ≤3 100 15 - 20 damp or wet substrates cold cure VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAMINE MB400P/FF

Epoxy mortars, adhesives, plasters. Excellent in wetting conditions and/or cold tempertaures (wet concrete). Excellent mechanical properties. Phenol free version of Itamine MB400/P

200 - 500 360 - 420 75 ≤5 100 20 - 30 damp or wet substrates cold cure VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente  
ITAMINE MB410P

Mortar, adhesives. Excellent in wetting conditions and/or cold temperatures. Excellent chemical and mechanical properties

50 - 200 340 - 370 95 < 7 100 20 - 30 damp or wet substrates cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante  
ITAMINE MB430P

Epoxy mortars, adhesives, plasters. Excellent in wetting conditions and/or cold tempertaures (wet concrete).Phenol free version of Itamine MB400/P, with beautiful optimized surface

300 - 700 440 - 500 67 ≤6 100 15 - 25 damp or wet substrates cold cure VOC free nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno    
ITAMINE MB501

Winter grade primers for concrete or metal, concrete reparation, epoxy mortars and general coatings with excellent reactivity even at near zero °C and damp or wet substrates.

100 - 400 520 - 560 95 ≤5 100 20 - 25 damp or wet substrates cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAMINE MB502

Solventless coatings, mortars, adhesives. Excellent in wetting conditions and/or cold temperatures. Excellent sleeping properties.

100 - 200 420 - 460 114 ≤5 100 16 - 24 damp or wet substrates cold cure nonylphenol free bisphenol-A free Acido Nocivo irritante Dannoso, cancerogeno, mutageno  

Formulated epoxy resins

Product Viscosity (cps@25°C) Density (g/mL@20°C) Equivalent epoxy weight (g/eq) Reticulable substance (%) Labelling Technical data sheet Safety data sheet Technical literature
ACQUAPOX 100

Emulsified solid epoxy resin in water. Ideal for metal protective coatings. Suitable for grinding.

100 - 1000 1.03 - 1.11 1000 - 1100 57 non pericoloso  
ACQUAPOX 200

Emulsified liquid epoxy resin in water. Ideal for protective coatings for metal or concrete. Low viscosity and fast drying.

100 - 3200 1.05 - 1.13 275 - 295 67 Nocivo irritante Dannoso per l'ambiente  
ACQUAPOX 301

Emulsifiable liquid epoxy resin. Suitable especially for flooring, mortars, 3-component systems. Usable also with classic non-waterborne hardeners

5000 - 7000 1.13 - 1.21 175 - 185 100 Nocivo irritante Dannoso per l'ambiente  
ACQUAPOX 302

Emulsifiable liquid epoxy resin. Extra low viscosity. Multi purpose, versatile resin, usable for low viscosity flooring formulations, anticorrosion, 3-component systems. Usable also with classic non-waterborne hardeners

1500 - 2000 1.10 - 1.18 195 - 205 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 50

Pure bisphenol-A liquid epoxy resin (product obtained by the reaction between bisphenol-A and epichlorohydrine)

11000 - 14000 1.10 - 1.20 180 - 190 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 50/50

Medium viscosity liquid epoxy resin made by bisphenol A resin (product obtained by the reaction between bisphenol A and epichlorohydrine) and bisphenol F resin (product obtained by the reaction between bisphenol F and epichlorohydrine)

4500 - 6500 1.10 - 1.20 169 - 181 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 70/30

Medium viscosity liquid epoxy resin made by bisphenol A resin (product obtained by the reaction between bisphenol A and epichlorohydrine) and bisphenol F resin (product obtained by the reaction between bisphenol F and epichlorohydrine)

5000 - 7000 1.10 - 1.20 175 - 190 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 75X

Bisphenol A solid epoxy resin (product obtained by the reaction between bisphenol A and epichloridrine) in Xylene solution. The equivalent epoxy weight is expressed for the solid resin only

6500 - 12000 1.10 - 1.20 450 - 500 75 Nocivo irritante Infiammabile Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAPOX 106

A/F liquid epoxy resin modified with mono and bifuncional reactive diluents, adhesion promoters, air releasers and levelling agents

450 - 650 1.10 - 1.14 195 - 205 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 108

Low viscosity Bisphenol-A liquid epoxy resin modified with glycidyl ether of C12-C14 aliphatic alcohol

400 - 700 1.10 - 1.14 200 - 210 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 108W

Modified Bisphenol-A + Bisphenol-F epoxy resin, with C12-C14 diglycidylether.

400 - 700 1.10 - 1.20 190 - 205 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 120

Low viscosity Bisphenol-A epoxy resin modified with glycidyl ether of aliphatic C12-C14 alcohol and o-cresol-glycidylether

500 - 800 1.10 - 1.14 195 - 205 100 Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAPOX 122

Bisphenol A liquid epoxy resin modified with o-cresol glycidyl ether

550 - 750 1.10 - 1.20 180 - 192 100 Nocivo irritante Dannoso per l'ambiente Dannoso, cancerogeno, mutageno  
ITAPOX 123

Bisphenol A/F liquid epoxy resin modified with glycidyl ether of aliphatic alcohol C12-C14 reactive diluent

800 - 1100 1.05 - 1.15 190 - 200 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 123A

A/F liquid epoxy resin modified with glycidyl ether of aliphatic alcohol C12-C14 reactive diluent and air releasers

800 - 1100 1.05 - 1.15 190 - 200 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 124

Biasphenol-A liquid epoxy resin, modified with 1,6-hexanediol diglycidylether. Better mechanical, chemical properties and faster curing compared to resins diluted with monofunctional reactive diluents

900 - 1200 1.12 - 1.15 175 - 185 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 127

A/F liquid epoxy resin modified with glycidylether of C12-C14 aliphatic alcohol. Faster curing and better crystallisation resistance compared to similar A/F formulations

900 - 1300 1.05 - 1.15 190 - 200 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 128

A/F liquid epoxy resin; modified with glycidylether of aliphatic alcohols C12-C14

800 - 1200 1.12 - 1.15 190 - 210 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 140

A/F viscosity modified with mono and bi-functional reactive diluents, air releasers, adhesion promoters and levelling additives. Ultra low viscosity with good final mechanical properties

250 - 450 1.10 - 1.14 190 - 200 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 160

Modified bisphenol A epoxy resin, suitable for food contact applications

500 - 700 1.10 - 1.20 165 - 175 100 Nocivo irritante Dannoso per l'ambiente  
ITAPOX 900

Modified non yellowing liquid epoxy resin. This resin is non UV absorbing compared to standard bisphenol-A or F epoxy resins. Does not contain optical brighteners or UV filters. Ideal for outdoor / low chalking / low weathering / no yellowing applications. Excellent reactivity compared to similar systems, while maintaining a defect free surface. To be used in combination with ITAMINE CA850

400 - 1100 1.09 - 1.13 190 - 200 100 Acido Nocivo irritante Dannoso, cancerogeno, mutageno  
ITAPOX 906

Modified non yellowing liquid epoxy resin. This resin is non UV absorbing compared to standard bisphenol-A or F epoxy resins. Does not contain optical brighteners or UV filters. Ideal for outdoor / low chalking / low weathering / no yellowing applications. Excellent reactivity compared to similar systems. To be used in combination with ITAMINE CA830

100 - 400 1.09 - 1.13 170 - 180 100 Acido Nocivo irritante Dannoso, cancerogeno, mutageno  

Hot melt polyamides

Product Viscosity Density (g/mL@20°C) Max acid value (mgKOH/g) Amine value (mgKOH/g) Gardner colour Solids content (%) Softening point (°C) Technical data sheet Safety data sheet Technical literature
ITAMID M2P

Suitable for the application in footwear sector and paper boards. Excellent thermal stability even in prolonged heating processes

2100 - 2700 (@160 °C) 0.96 - 1.00 10 (*) <10 100 105 - 115    
ITAMID M3P

Ideal for footwear and paper applications. Excellent thermal stability even after prolonged heating. Increased flexibility compared to M2P

1900 - 3400 (@160°C) 0.96 - 1.00 10 (*) <10 100 100 - 110    
ITAIMD M15P

Automotive, electrical appliances, lamination; application on glass, plastic and metal supports with high flexibility at room temperature.

1000 - 1800 (@170°C) 0.96 - 1.00 2 50 - 65 <8 100 140 - 160    
ITAMID M16P

High performance highly flexible polyamide with higher softening point and high thermal stability

800 - 1500 (@180°C) 0.96 - 1.00 2 40 - 55 <8 100 160 - 180    
ITAMID M20P

Polyamide for flexo inks and rotogravure. High flexibility and adhesion of the film, high gloss and water resistance. Excellent solubility in ethanol and solvent mixtures.

1000 - 1700 (@160°C) 0.96 - 1.00 3 1 - 7 <10 100 100 - 115    
ITAMID M21P

Polyamide for flexo inks and rotogravure. Excellent adhesion, gloss and water resistance. Enhanced gelling and blocking resistance

300 - 500 (@160°C) 0.96 - 1.00 7 1 - 7 <10 100 110 - 120    
ITAMID M30P

Suitable for lamination inks and special adhesives. Outstanding flexibility and adhesion, also on polyolefin substrates (including PVC)

1500 - 2100 (@200°C) 2 6 - 13 <8 100 135 - 145    

Our group